Linear Encoder Summing Interface
DRO Console

The M-DRO summing interface is a plug in unit that will combine the output of two M-DRO encoders into a single output for the M-DRO display consoles. Applications include combine mill quill with knee travel or lathe compound travel with main carriage travel.

  linear encoder summing interface


Compatible with 1, 5, 10 and 25 micron resolution quadrature encoders. Please note both encoders connected must be the same resolution.

Adaptor cables can be used to convert existing readout equipment from other DRO manufacturers to be compatible with the summing interface. For example a mill fitted with a Acu-rite encoder on the knee could connect to the summing interface via a suitable adaptor cable, an M-DRO encoder code be fitted to the quill. The output of the two encoders would connect to the summing interface, the output from the interface can then be connected directly to a M-DRO console or through a suitable adaptor to the existing Acu-rite encoder.

The interface does not require an external power supply.

Designed and built in the UK

Information

Opening Times

 Monday  09:00-17:30
 Tuesday  09:00-17:30
 Wednesday  09:00-17:30
 Thursday  09:00-17:30
 Friday  09:00-17:30
 Saturday  Closed
 Sunday  Closed

*excluding bank holidays

Contact Details

allendale group logo

The Allendale Group Ltd
M-DRO Department
Pindar Road

Hoddesdon
Hertfordshire
EN11 0BZ
United Kingdom

Tel : +44 (0)1992 455 921

This email address is being protected from spambots. You need JavaScript enabled to view it.